LINKS radio transmitters are designed for long distance operation in a differentiated radio network. The radio transmitter sends information (codes) preset in the DSC control panels without the need for additional manual input. It connects to the alarm panel communication bus and only the subscriber identification code needs to be programmed. All devices are equipped with a separate input for ‘Tamper’, which is switched from low voltage.
Power P≥5W or less;
Frequency range: 130-175 MHz and 400-490 MHz;
Channel spacing: 12.5 KHz;
Antenna with 50 Ω impedance and circular diagram;
Data rate: 400 – 1200b/s
Compatible with the following protocols: KP Electronics – LARS and LARS1, Electronics Line – KEL, Informer, PPE and PPE1;
Encrypted communication with error correction algorithm in transmitted signals;
Connection via the communication bus of the DSC control panels;
Transmission of up to 65 536 encrypted events (codes).
