MDU-V Wireless panic button

Transmitter with dynamic code

Up to 15 transmitters can be trained
Ability to erase if transmitter is lost
Extended transmitter range
Relay output with changeover contact
LED indication of relay activation (and programming mode)
Program mode selection
Serial Communication
ANNEX:

Remote control of low-voltage devices by switching (one switching dry contact per relay)
Switching security control panels on and off with the „key control“ function
Remote panic button in security systems
Access control systems
OPERATING MODES:
The unit has four modes of operation, depending on how the relay is switched on and off:

Mode 1 – the relay switches on when the large button (I) is pressed and switches off when the small button (II) is pressed.
Mode 2 – the relay switches on when button I and button II are pressed at the same time and stays on until released.
Mode 3 – the relay turns on when button I is pressed and stays on until it is released.
Mode 4 – similar to mode 1, holding the button for more than 3 seconds is required to turn on.
The switch-on time must be at least 2 seconds, irrespective of the operating mode.